User Contributed                                            MET/CAL Procedure
=============================================================================
INSTRUMENT:            EMC 11 CW Sub
DATE:                  21-Dec-95
AUTHOR:                User Contributed   
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       7
NUMBER OF LINES:       76
CONFIGURATION:         HP 3325A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  IEEE         [TERM LF]
  1.002  HEAD         {}
  1.003  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.004  HEAD         {º CW Voltage Accuracy º}
  1.005  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.006  HEAD         ÍÍ CW Voltage Accuracy ÍÍ
  1.007  JMP          2.001
  1.008  EVAL
  2.001  DISP         Connect the 3325A output to the UUT RF input
  2.001  DISP         via the adaptor box on the UUT.
  2.002  IEEE         [TERM LF]
  2.003  IEEE         DET:RMS[13][10]
  2.003  IEEE         [T0]IMP:50[13][10]
  2.003  IEEE         HPF:0016[13][10]
  2.003  IEEE         BW:0010[13][10]
  2.003  IEEE         ATT:110[13][10]
  2.003  IEEE         OUT:IF[13][10]
  2.004  IEEE         GTL[13][10]
  2.005  DISP         Manually tune the UUT for .100 kHz.
  2.006  IEEE         [T0]CAL[13][10]
  2.007  IEEE         [@3325]FU1;AM 100MR;FR 100HZ
  2.008  IEEE         GTL[13][10]
  2.009  DISP         Tune the UUT to peak the analog meter.
  2.010  IEEE         [D1000][I][13][10][D1000][I][13][10]
  2.011  ACC          100.0d         0.4U
  2.012  MEME
  2.013  MEMC         d              2.0U          .1kH
  3.001  DISP         Manually tune the UUT for .500 kHz.
  3.002  IEEE         [T0]CAL[13][10]
  3.003  IEEE         [@3325]FU1;AM 100MR;FR 500HZ
  3.004  IEEE         GTL[13][10]
  3.005  DISP         Tune the UUT to peak the analog meter.
  3.006  IEEE         [D1000][I][13][10][D1000][I][13][10]
  3.007  ACC          100.0d         0.4U
  3.008  MEME
  3.009  MEMC         d              2.0U          .5kH
  4.001  DISP         Manually tune the UUT for 2.5 kHz.
  4.002  IEEE         [T0]CAL[13][10]
  4.003  IEEE         [@3325]FU1;AM 100MR;FR 2.5KH
  4.004  IEEE         GTL[13][10]
  4.005  DISP         Tune the UUT to peak the analog meter.
  4.006  IEEE         [D1000][I][13][10][D1000][I][13][10]
  4.007  ACC          100.0d         0.4U
  4.008  MEME
  4.009  MEMC         d              2.0U          2.5kH
  5.001  DISP         Manually tune the UUT for 10 kHz.
  5.002  IEEE         [T0]CAL[13][10]
  5.003  IEEE         [@3325]FU1;AM 100MR;FR 10KH
  5.004  IEEE         GTL[13][10]
  5.005  DISP         Tune the UUT to peak the analog meter.
  5.006  IEEE         [D1000][I][13][10][D1000][I][13][10]
  5.007  ACC          100.0d         0.4U
  5.008  MEME
  5.009  MEMC         d              2.0U          10kH
  6.001  DISP         Manually tune the UUT for 25 kHz.
  6.002  IEEE         [T0]CAL[13][10]
  6.003  IEEE         [@3325]FU1;AM 100MR;FR 25KH
  6.004  IEEE         GTL[13][10]
  6.005  DISP         Tune the UUT to peak the analog meter.
  6.006  IEEE         [D1000][I][13][10][D1000][I][13][10]
  6.007  ACC          100.0d         0.4U
  6.008  MEME
  6.009  MEMC         d              2.0U          25kH
  7.001  END